Проблема в акпп с включением задней передачи

[maverick80gg]

здравствуйте,

Я новичок в форуме , и я по-французски.

Я хотел бы знать, как удалить кислородные датчики перед катализатором на 2005 SRX V8

bonjour,

je suis nouveau sur le forum et je suis français .

J'aimerai savoir comment démonter les sondes lambda avant le pot catalytique sur un SRX V8 de 2005.

[777ded777]

точно avant ,а не après ?

 

[maverick80gg]

один раньше.

celles qui sont avant.

[rewers22]

передние удалять не имеет смысла- их надо чинить( менять)

задние и ошибки по катализаторам - я могу отрезать

[maverick80gg]

Простите, я не понял.

[zverradze]

He means no need to remove the first lambdas (before catalytic converter), usually specialist removes the second lambdas (after catalytic converter) with permanent changing of ecu's program.

 

either delete O2 DTC codes only or deep changing ecu's algorythm for working without them

 

first lambdas are necessary for closed loop fuel management in stoichiometry, that's why only changing for the new one

[rewers22]

Спасибо за транслит - я чесно говоря не догадался на аглицком написать

[maverick80gg]

Спасибо всем .

Я хотел бы знать , если это необходимо , чтобы удалить cataliseur к падению зонд .

[rewers22]

200 $

[maverick80gg]

it's not cheap for a coucil

[rewers22]

C'est la vie , Mon Ami...

[Tiger]

It's cheap considering how many ppl can even start to mess with SRX1.

[rewers22]

ce est le prix du catalyseur?

200$-ce est un petit prix...

[maverick80gg]

i'm only want to know how to change the oxygen sensor who is localized before the catalytic converter.

I don't want to change the catalytic converter.

[Tiger]

To change the front O2 sensor you just need to release the jack behind the engine (reach out from under the hood in the gap between the back of the engine and end of hood compartment) and then just unscrew the sensor which is a little tough.

[maverick80gg]

I was afraid to have to disassemble the catalytic .

Thanks you, Tiger.

[Tiger]

You can't disassemble the catalytic converter but it will be quite hard to get to the sensor itself and it is not an easy task to screw it off.

[maverick80gg]

I 'm not sure of having to disassemble but I have come to turn a fault code , the former owner told me to disassemble the oxygen sensors for cleaning.

I will have to invest dance this type of device:

http://www.docteurauto.fr/12-launch-creader-vi.html?gclid=CMDJ1cimzcECFdTLtAodeF8AHw

[Tiger]

Yes, that device will read your engine codes, not sure about ABS and transmission though, you have to check on that. But it is definitely a good investment owning a Cadillac

There's usually very little sense to clean front O2 sensors, if they stop working, they are usually broken. Front sensors are 6-band and they are critical to fuel mixture.

[rewers22]

the device will not be able to read the ABC and transmission .PCM read only.

[maverick80gg]

thanks you.

Otherwise , I had seen this material:

http://www.materiel-hi-tech.fr/valises-boitiers-diagnostic/176-boitier-diagnostic-auto-odb-usb.html

but I do not know if it will work on the Cadillac.

Will he be able to read the fault transmissions and ABS ?

 

[Tiger]

Don't see anything here that says it will read ABS and/or tranny. Usually those are much more expensive. Simple ones only read engine codes.